Ask Electronics

3325 readers

1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de

Sanity check for LiFePO4 Charger Design (voltage.vn)

submitted 11 months ago by Saigonauticon@voltage.vn to c/askelectronics@discuss.tchncs.de

17 comments fedilink hide all child comments

So, there are these great 32700 LiFePO4 batteries that showed up in my local industrial market. For like USD 2$!

However, there are no LiFePO4 chargers available. The vendors assure me I can "totally use" a 4.2V Li-ion charger, but I don't believe them (although the cells test as being in good shape).

I whipped up a 5V system with a buck converter managed by an MCU. It turns off the buck converter that charges the battery, measures the battery voltage, and if it's under 3.6V it enables the buck converter. Repeats every few 100s of milliseconds.

Did I overengineer this? Could I have just used a linear voltage regulator that outputs 3.6V (or a Zener), and a current-limited 5v power supply?

Charge speed is not really important in my application. Anything under 4 hours is great. Frankly, I'm just trying to phase out the less safe kinds of lithium cell in my lab.

you are viewing a single comment's thread
view the rest of the comments

[–] Eheran@lemmy.world 1 points 11 months ago (1 children)

Get a board with a TP5000. Like this one here.

Don't charge LFP to 4.2 volt! The crude "check voltage and if below 3.6 V keep charging" is okay too as long as the maximum current is within battery spec. But measure while charging, don't turn that off to measure the open circuit voltage.

[–] Saigonauticon@voltage.vn 2 points 11 months ago (1 children)

An international parts order is too complex for such a small thing. I'm not in the USA or China. So no TP5000 for me, got to work with what I have.

I agree, no charging at 4.2 volts. The current charger I built seems to work well enough. I ran some tests and it charges within spec. The reason I turn off the charger to measure cell voltage is because otherwise I'll mainly be measuring SMPS noise.

Anyway it beats the charger available in the local market, which is clearly unsafe, no matter how much they assure me that it's 'totally OK'.

[–] Eheran@lemmy.world 1 points 11 months ago

Perfect.