[-] MystikIncarnate@lemmy.ca 16 points 7 hours ago

I think this is the first time I've seen a still picture move this much.

Hot damned.

[-] MystikIncarnate@lemmy.ca 7 points 17 hours ago

It'll snuggle you for the rest of your life.

[-] MystikIncarnate@lemmy.ca 3 points 1 day ago

That's a very normal reaction. You're putting your life in the hands of technicians and engineers, to build, maintain and service the aircraft so it functions, qualified inspectors to certify that the plane is safe to fly, and pilots to fly the aircraft, and you, safely to your destination. Pretty much everyone you're putting your life in the hands of, you've never met, never will, and it's unlikely you'll even know their names.

It's a lot of trust to put into people you don't even know, to keep you alive in your chair in the sky.

If that reality doesn't at least give you pause, or some concern, then I'd be worried there's something seriously wrong with you.

Rest assured that statistics are on your side. It's far more likely for you to get to your destination without any significant complications then it is for any complications to happen, including any that might lead to a crash or a fatality. Statistically, it's comfortably one of the safest, if not the safest, method of travel.

There's nothing wrong with having some apprehension, fear, or worry, over placing your life in the hands of complete strangers; despite how qualified each and every one of them might be, they're still strangers.

All I can say is, if you're bothered by it, learn how to parachute solo. It'll take a while, but learn it. Then just pack your own parachute any time you fly. Problem solved. If you lose confidence in the pilots to keep you alive, bail.

[-] MystikIncarnate@lemmy.ca 8 points 1 day ago

Thanks. I think a lot.

Probably too much

[-] MystikIncarnate@lemmy.ca 22 points 1 day ago

Not a stupid question.

Between the training required for a solo parachute jump, and the cost (and more importantly) weight of the equipment, plus the relative safety of commercial flights, it's simply not justified.

In more than a few cases we've seen airliners make emergency landings that are gnarly, but the majority survive. In more cases than I can count, there's checks and balances that ground flights because of safety concerns either at the departure point or at the destination (icing, high winds, etc), or due to mechanical concerns.

It's rare that a fully inspected and functional aeroplane will fall out of the sky, and we do everything in our power to ensure that all planes that leave the ground are fully inspected and functional. Short of a freak occurrence, like a fast forming weather phenomenon, there's so many checks and balances that airliner crashes are exceedingly rare.

So not only is a crash rare, there's no guarantee that a crash will be fatal, usually the pilot can at least get the plane on the ground without killing everyone aboard, and the fact that it's a massive amount of extra weight that requires training that the average person doesn't have, there's little point and nearly nothing to gain from doing something like that, while it would have significant downsides on flight efficiency and increase the costs of fuel per flight due to the extra weight.

Then there's the consideration of, even if they were able to successfully parachute to the ground, what then? It's pretty much a guarantee that nobody has a radio, and that you're far enough away from civilization that your cellphone doesn't work, so now you have hundreds of people spread out over potentially thousands of miles of terrain/water/whatever that you now need weeks to search and rescue everyone. Taking weeks on search and rescue, pretty much guarantees that you'll find people who landed safely, then died from exposure to the environment.

On the flip side, if everyone is in the plane when it crashes then all you need to do is find the plane; everyone will be in that general area, whether alive or dead.

There's just too many downsides to having parachutes on board to make it feasible.

[-] MystikIncarnate@lemmy.ca 45 points 1 day ago

The people that voted for this shit have the biggest blinders on right now. I'm sure they're trying to ignore that anything has gone wrong.

I hope someone with enough money to make this a problem for the policy makers gets after this in court soon. The USA needs to either pass a federal law stating that abortion is legal, or they need a new roe v. Wade judgement on the books. Until one of those things happens, this continual and unnecessary loss of life will continue; it is inevitable.

For people who call themselves "pro-life" they sure don't give any shits about people continuing to live.

Anyone who is anti abortion, this is for you: 🖕

Sincerely,

  • your horrified neighbor to the north.
[-] MystikIncarnate@lemmy.ca 19 points 3 days ago

My take is that regardless of what system of government you use, there will be the affluent/aristocrats that run everything, get all the nicest shit, etc, and the unwashed masses who get whatever is left over.

This is a people problem, not a system of government problem.

The only way to balance everything is to basically make everyone in the country responsible for voting on all policy, which is impractical at best; the only alternative is to have a very altruistic leader in charge of making the final decisions.

If the leader can't consistently make decisions that benefit the people at the cost of his own happiness, affluence, wealth, etc, then what is demonstrated by this meme, is always going to be inevitable.

IMO, someone that altruistic will not hold power since those that are supposed to implement their orders, will quickly turn against them, resulting in a coup, and the leader being ousted for someone more selfish, who will reward the those with power unfairly by taking the rewards away from the "lower class" to give to them.

Everything is doomed to failure. Move to the forest and start from scratch.

[-] MystikIncarnate@lemmy.ca 1 points 3 days ago

Auto carrot strikes again

[-] MystikIncarnate@lemmy.ca 6 points 4 days ago

For anyone scrolling far enough to read this, all of the correct answers for this, follow the same formula. Statement about how you cannot tell leading into a compliment about their looks.

This can be reversed, complimenting they're looks, and lead into that it is impossible to tell.

Unless she looks like the wicked witch of the west, like one girl I knew. She had surgery at some point, and I only knew her after that happened. I am not exaggerating with that reference.

Bluntly, I couldn't have cared less. Things didn't work out for completely unrelated reasons.

[-] MystikIncarnate@lemmy.ca 2 points 4 days ago

ADHD here, after years of studying behavior from normies in order to emulate/mask, this is easily one of the best answers here.

Sometimes brutal honesty is the answer.

[-] MystikIncarnate@lemmy.ca 2 points 4 days ago

I think they open sourced that recently... I should take a look.

[-] MystikIncarnate@lemmy.ca 2 points 4 days ago

Yep. With my dad teaching computers, we always had one in the house. I started on DOS, and I've used most versions of Microsoft operating systems since then.

I've built computers, upgraded, modified, tweaked and nerded out over low level settings and optimizations....

At this point, I can do all of that. I choose to simply buy something off a shelf because I can't be bothered to do everything that's needed to get my system working perfectly. Someone else has done the engineering to make their PC's operate efficiently, so I'll just let them do the hard work, and pay slightly more for my system so I don't have to think about it.

Once the warranty is up, and something goes wrong, I'll be in there with a multimeter and soldering iron to fix it if I have to....

72

So, I just need to rant for a minute about what's just happened. It's made me feel fairly disposable as a worker. I work in I.T. support. I help people who can't operate technology with highly complicated issues. I am highly skilled, well trained and I have a diverse set of understanding for technical issues.

Last year I took a new job. The old job was an MSP, or Managed Service Provider; if you don't know what that is; an MSP is the IT department for companies too small to have an IT department. That's the summary. The new company is both an MSP and an ISP as well as just about everything else you can imagine for IT.... hosting webpages, and all the associated nonsense, phones/VoIP, colocation (Datacenter stuff).... everything. Basically, when someone was signed onboard with this employer, we did it all.

Starting out, everything seemed fairly normal, a bit more involved, since we do more than the last company, but nothing too crazy. The part that irked me, is that as MSP, we own a client, we do everything for them, including, but not limited to all their computer/server/network work (which I expected), but also their phones, internet service, hosting, email, etc. everything.... which is a bit more than I expected, but I was managing okay.

In March/April, things changed in my personal life, where I was having to drive my SO to work (she doesn't have her license, and we don't live in a place where she can reliably get a taxi/bus/other transportation), the problem is that her work is 3-11, where I work 9-5, in another city. So I tried to work with my workplace but they wouldn't let go of working from the office, so I ended up on an insane schedule of commuting to the office (over an hour drive each way), then leaving the office at 1PM, to be home for 2PM, to get her to work for 3PM, then GOING BACK TO WORK. I wasn't able to keep up with my workload.... in addition, I'm driving her home at 11, getting home at midnight, then getting up at 5-6AM to get a shower and do it all over again. I couldn't sustain that for any reasonable length of time, and I burned out. My doctor issued a notice to my workplace that I am unable to continue working for the time being, they accepted it and I went on disability as of early may, until now.

Currently, I feel much better, compared to when I was burning out in April, and I feel a lot better about going back. The SO has also been working on getting her license and her own car, so within a few months I won't have to even think about whether she can get to work or not, since she will have a car and her license to drive herself there. A week or two ago, I contacted my workplace to let them know I was ready to return. We had a few emails back and forth to resolve the matter of the doctors recommendation and disability diagnosis. Once all that was completed, I thought I was ready to go. Big nope.

I got word yesterday that instead of bringing me back, they're laying me off.

So not only did they have the callous attitude to force me to drive to the office and back several times a day to try to maintain a poor life scenario (I asked to WFH, which they absolutely could do, since they did it over COVID without significant issues).... but when I burned out as a result of their ridiculous demands, and took some time off, instead of welcoming me back and holding my position, they filled in the gap while I was out on disability, and laid me off when I was able to return.

I feel so abandoned. I won't complain about "where's the loyalty" because there's never been a time in my career where "loyalty" has ever been something I've felt that my workplace ever gave me; and all evidence I've seen says that companies have zero loyalty to anyone. Maybe one day in the past that was true, but it's definitely not been true for the entirety of my working career; but here I am, a highly skilled individual, with specific skills that will absolutely help the company succeed, that they know I have, that they're just going to throw away... and for what?

The excuse they gave me was financial downsizing, but it's a company of about 12-18 people, so it's not like my job was part of a larger dismissal of people, they've lost, laid off, or otherwise shed employees at a very slow rate. Some of my (now former) coworkers have said that several people who have voluntarily left their positions, have been replaced during my time away; but me? no. Apparently my knowledge isn't worth enough to them.

I'm currently on the hunt for a new employer. IMO, these guys are fools to throw away everything I know. The only challenge I face right now is finding someone who will see my value. IT support jobs are usually underpaid in my local area, and too many companies are going return to office and I'm not easily able to find remote (WFH) type employment. The jobs are there, but it's hard to find one that's worth my time. The core issue IMO, with the low pay, is that it's a non-union position, but if I can find a union job, I'm all in.

Wish me luck!

17

Looking for some advice here, I'm out to complete two things:

  1. restore saves from the games I played using the stock firmware to GarlicOS
  2. get two player/two controllers working for couch gaming over HDMI

Specifics: I picked up a 16G microSD for the OS, and a 64G for ROMs, pulled the original (kinda garbage) SD and replaced it with the 16G that I loaded with GarlicOS. I copied the relevant roms that I loaded onto the original SD to the new set and moved the save files ( .sav) over to the saves folder in the relevant subfolder. Launching the game results in a blank save. I can't continue the save.

For dual controller/two player, I haven't tested HDMI yet (on the list) I'm just trying to get controllers working at the moment; I have an Anker USB 3 hub. What works right now, is if I plug my Stadia controller in, it gets picked up, no problem. but my xbox controller will mess everything up. If I just do my OTG adapter to the stadia controller, it works, OTG to hub to stadia, no problem. If I either go OTG to the xbox controller, or OTG to hub to controller, it does not come up in GarlicOS. If I plug OTG to hub to both controller, neither shows up. I added waitForUSB (I also tried waitforUSB) file to the OS SD card, with no effect (the file still exists).

With stock, I was able to use a controller (just the stadia controller), over USB OTG with HDMI, so I know that works, and it should still work. The Xbox Controller I'm using is almost brand new, it's an XBOX One controller, connected by a USB A to C cable, I picked up 10ft cables from Anker for the purpose. I'm fine with wired, but I also have a USB xbox wireless dongle for PC that I can't seem to find right now, and I'm wondering if that would do any better (and I would prefer this since it would be wireless).

Does anyone have any hits or tricks or information related to this that I can use to push this along? is the new series of xbox controllers not compatible? do I need to change the drivers or something to make it work better? I'm new to retroArch, and GarlicOS, and the 35xx is my first dedicated retro handheld. I'm refreshingly not new to linux or SBC's, so I'm very comfortable with making changes and taking chances. All my saves are archived on that original SD card, and I have a backup on my laptop, so I'm not worried about losing saves or data at all. If the controllers are not viable, I'm sure I can find something that works and pick that up, maybe something from 8bitdo.

Thanks in advance.

1

Two subreddits I used to be very active in were for techsupport and networking/home networking. Anyone know if there's Lemmy communities for the same?

Also, related, is there a way to list communities available from a specific instance? Like if I wanted to see all communities local to Lemmy.world or something (that's not my local instance), can I do that? If so, how?

I'm still getting used to the fediverse way of doing things, I love it here, I'm just having trouble getting myself up to speed relative to all that I was subscribed to on Reddit.

TIA

11
offboard zwave (lemmy.ca)

Hello Lemmings.

This is something I've been thinking about for a while; basically, I want to move my zwave node away from my main HomeAssistant system.

I'll try to be brief; my current config is a single mini/micro system (Dell, I believe), Core i5, 8G RAM and an SSD, it's a ton of power for HA and massive overkill, I know. The problem is that the system is located in a remote room of the house, so the signal isn't exactly the best and I have some nodes that are linked through 2-3 other devices; I'd like to move the USB Z-stick to a more central location, and I don't think a USB extension is going to cut it. I have ethernet wire which is far more viable to get a connection across to the HA computer. I don't want to move the HA computer away from where it is, since there's backup power where it is; so my idea would be to use something like a Raspberry Pi (now that availability seems to be improving), connected by Ethernet using PoE (for power availability from the UPS). Provided I can get a Raspberry Pi, and all the related and required parts together, which should be fairly trivial; how would I connect the zwave dongle on the Raspberry Pi to the computer running homeassistant?

I haven't considered this before due to the pi being so difficult to get since I put together the homeassistant system. Ideally, I would want several of these systems placed at key points around the house so that I wouldn't need any of the zwave nodes to relay communications, but that's future plans more than anything - I would need to source several zwave dongles and get them all on raspberry pi's and get them working together.... So going about it towards that end would be a bonus; but at least I want to do some research on it and figure out if I can even relocate the dongle at all first. Any infromation to that end is appreciated.

I'm currently using ZWaveJS UI.

view more: next ›

MystikIncarnate

joined 1 year ago