87

Basically I'm trying to de-clutter the cables to my charging station, and was hoping to use a 3-way cable for my phone, watch, and headphones.

My main concern is if one device is able to successfully negotiate QuickCharge or PD, would that send 9-20 volts to the other devices?

e.g. if I grabbed the wrong cord and hooked it into my laptop, the laptop requests 20v, would that PD negotiation succeed and also send 20v to my 5v devices on the other two leads?

I've only used these kinds of cables with USB-A and chargers that can only output 5V. Most of my chargers now are QC/PD so I'm curious if I should avoid those or take any particular precautions.

all 33 comments
sorted by: hot top controversial new old
[-] Buffalobuffalo@reddthat.com 42 points 2 months ago

Have you thought about 3 cables but running them through a cable sleeve? This way you can get a three port charger and three cables But have them feel like one big cable.

[-] ptz@dubvee.org 17 points 2 months ago

I'm kind of doing that with wire ties every few inches. Haven't thought of a cable sleeve, though. That would probably work and look better. Thanks!

[-] 11111one11111@lemmy.world 4 points 2 months ago

Yooooooo wire sleeves are about to change your life lol they are the best shit since sliced bread. I get a roll of like 3 different diameters to have on hand at home for living room and office wire management.

[-] Buffalobuffalo@reddthat.com 2 points 2 months ago

Another option may be something like this and then some 6inch cables. This is not a recommendation. This is just a random one from Amazon.

Usb strip

[-] CarolInHR@lemmy.world 4 points 2 months ago

Might be worth looking at a charging dock, ie:

https://a.co/d/2BKrw3T

[-] TheRealKuni@lemmy.world 2 points 2 months ago

Especially as more devices start utilizing Qi2 wireless charging with magnets. Otherwise for non-iPhone devices you need something like a magnet ring or the wonderful Snap 4 Luxe to utilize a magnetized wireless charging stand.

I have this awesome Anker one on my nightstand and it charges my iPhone, Apple Watch, and Jabra earbuds. There are cheaper options, but this one let me charge the watch at it’s highest speed.

[-] db2@lemmy.world 31 points 2 months ago

My main concern is if one device is able to successfully negotiate QuickCharge or PD, would that send 9-20 volts to the other devices?

Yes, but these cables won't do that anyway. You'll get 5V and maybe 1.6A if you're lucky. They're good for charging a flashlight.

[-] ptz@dubvee.org 7 points 2 months ago* (last edited 2 months ago)

That's what I was thinking (basically assuming they lack the CC wires/pins to negotiate power delivery), but the listing does say one of the leads does support data transfer which made me wonder. I'm assuming they share the VCC and ground so if the data-capable one triggered a higher voltage from the charger, then they all would get the same output voltage.

I'm not sure how QC is negotiated, but it doesn't seem to need any extra pins like Power Delivery, so I still wonder about that.

[-] adespoton@lemmy.ca 2 points 2 months ago

Does someone make a plug that you can stick on a cable that will identify its capabilities? If they don’t, they should.

[-] felbane@lemmy.world 7 points 2 months ago

I bet Fluke will sell you one for $900

Like this?

I don't have one of those, but I do have one of these to test USB C power supplies. It will also test the cable you have connected to see if it's emarker says it's rated for various things. But it doesn't actually test that those things work.

[-] ptz@dubvee.org 1 points 2 months ago

I think those do exist, but I don't have one.

[-] jol@discuss.tchncs.de 1 points 2 months ago

Would it world on a fleshlight too?

[-] NeoNachtwaechter@lemmy.world 25 points 2 months ago* (last edited 2 months ago)

My main concern is if one device is able to successfully negotiate QuickCharge or PD, would that send 9-20 volts to the other devices?

Yes.

QC negotiation works by changing the voltage. This communication would be broken if you plug several devices to 1 charging port.

So you better get a charger with several ports where each port is capable of delivering QC / PD. They have independent communication then, and each device gets it's proper voltage.

[-] AVincentInSpace@pawb.social 15 points 2 months ago

That's assuming this cable forwards PD signals at all.

[-] PM_Your_Nudes_Please@lemmy.world 3 points 2 months ago* (last edited 2 months ago)

That would actually be the safer scenario, as a failure in the PD handshake simply defaults to 5v which every USB device can accept. It would be more dangerous to only have the PD negotiation be on one of the three ports, because then you could potentially burn out devices on the other two by sending them too much voltage.

I guess the best case scenario would be to have the PD signal run on all three, then default to low voltage if any of them fail. But that's likely not what they're doing, because then things would only fast charge if all three ports are plugged into fast charge devices. Because an unplugged tail would likely register as a failed PD handshake.

[-] NeoNachtwaechter@lemmy.world -1 points 2 months ago* (last edited 2 months ago)

No. In QC it is the main voltage that is changed. No extra signal lines.

[-] AVincentInSpace@pawb.social 7 points 2 months ago

USB-PD changes thr main voltage in response to a handshake protocol on the C1 and C2 data lines, which this cable likely doesn't connect for precisely this reason. Qualcomm QC still uses D+ and D- to negotiate the higher voltage, which this cable likely wouldn't connect either.

[-] Rooki@lemmy.world 17 points 2 months ago* (last edited 2 months ago)

I would think only the power connection ports are connected ( sort of a "dumb" cable ) Only way i can imagine is either its in their specs or cut one of them open to see what is connected ( dont connect anything after cutting it open )

Rule 3 applies here, expect here no professionals.

[-] Bishma@discuss.tchncs.de 7 points 2 months ago

Power-only is my guess too, and when you only have power pins connected, USB 3 defaults to 5V 1A.

[-] ptz@dubvee.org 4 points 2 months ago

Two of them are just power (according to the listing) but one does support data transfer. I'm assuming the VCC and ground are shared among all 3. It may not have the CC pins needed to support PD, but QC might be something to worry about.

Probably just going to stick with my hub + individual cables and deal with the spaghetti. lol

[-] Rooki@lemmy.world 4 points 2 months ago

Yeah probably, i could think it could become a fire hazard real quick if all of them are used simultaneous, especially if it comes from amazon. Louis Rossman has some good videos about dangers of amazon products ( https://www.youtube.com/watch?v=y83BS_mK9GE )

[-] Cort@lemmy.world 8 points 2 months ago

Do you use all the cables all the time? If not, you could get a couple retractable ones to keep things tidy. Then just plug in the 2-3 things you regularly use.

[-] ptz@dubvee.org 4 points 2 months ago

Usually, yes. It's where my daily-carry devices (phone, headphones, and watch) get plugged in each evening.

Someone recommended using cable sleeves to tidy things up, and I think that's the route I'm going to go.

[-] Trex202@lemmy.world 3 points 2 months ago

Your watch... does the charger plug into the USB, or does USB plug into the watch?

[-] ptz@dubvee.org 1 points 2 months ago

Charger into USB.

[-] Kaiyoto@lemmy.world 7 points 2 months ago

Yeah I wouldn't trust it, you can get USB hubs for fairly cheap. I just googled and saw one for 10$-12$ from Anker.

[-] ptz@dubvee.org 5 points 2 months ago

Yeah, that's my current setup. Was just trying to reduce the amount of cables overall. But cheap cables of questionable craftsmanship combined with two complex charging standards sounds like it's going to be a recipe for blue smoke.

[-] BearOfaTime@lemm.ee 2 points 2 months ago

*Magic smoke 😆

[-] HeyJoe@lemmy.world 7 points 2 months ago

I feel your pain for the declutter... I as well have about 3 cables plugged into a super charger and I love the charge times it provides, I hate the cables. I really wish they made a cable that rolled back up like those ID badge lanyards you attach to your belt. Only take the cable you need and once done it rolls back up into a small space.

[-] CodingCarpenter@lemm.ee 4 points 2 months ago

I actually looked for something like this and while they do exist, they all seem really shoddy and I would not trust them with my devices sadly

[-] ChaoticNeutralCzech@feddit.org 2 points 2 months ago

I don't think they would destroy your devices but I do have a non-PD power-only triple-ended retractable cable and it is shoddy.

this post was submitted on 24 Aug 2024
87 points (93.9% liked)

No Stupid Questions

35681 readers
932 users here now

No such thing. Ask away!

!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must be legitimate questions. All post titles must include a question.

All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.



Rule 2- Your question subject cannot be illegal or NSFW material.

Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding META posts and joke questions.

Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.

On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.

If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.



Rule 7- You can't intentionally annoy, mock, or harass other members.

If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- Majority of bots aren't allowed to participate here.



Credits

Our breathtaking icon was bestowed upon us by @Cevilia!

The greatest banner of all time: by @TheOneWithTheHair!

founded 1 year ago
MODERATORS